You have no items in your shopping cart.
Products
- P1192 Mahindra Bolero (VLX)(m2Di CR) - Maximum positive Rail pressure deviation exceeded.
- P1193 Mahindra Bolero (VLX)(m2Di CR) - Maximum positive Rail pressure deviation exceeded concerning the set flow value.
- P1210 Mahindra Bolero (VLX)(m2Di CR) - Chip-specific errors : CY33X internal reset / clock loss /under voltage
- P1211 Mahindra Bolero (VLX)(m2Di CR) - Chip-specific errors: CY33X is unlocked / CY33X init error.
- P1212 Mahindra Bolero (VLX)(m2Di CR) - Chip-specific errors:CY33X is in Test mode.
- P010A Mahindra Genio (BS III & BSIV)- Correction factor 1 monitoring of the drift compensation function of AFS.
- P1213 Mahindra Bolero (VLX)(m2Di CR) - Chip-specific errors: CY33X SPI communication error/checksum/read back.
- P1214 Mahindra Bolero (VLX)(m2Di CR) - Chip-specific errors ->CY33X internal parity error.
- P1215 Mahindra Bolero (VLX)(m2Di CR) - Chip-specific errors ->CY33X internal program flow error.
- P1216 Mahindra Bolero (VLX)(m2Di CR) - Chip-specific errors ->CY33X check of inv. YSEL during ON failed
- P0102 Mahindra Genio (BS III & BS IV) - Signal range check of air mass, voltage below lower limit.
- P1217 Mahindra Bolero (VLX)(m2Di CR) - Chip-specific errors ->CY33X ON timeout for at least 1 cylinder.
- P0103 Mahindra Genio (BS III & BSIV)- Signal range check of air mass, voltage above upperlimit.
- P0107 Mahindra Genio (BS III & BSIV)- Environment Pressure Sensor voltage below lowerlimit.
- P1220 Mahindra Bolero (VLX)(m2Di CR) - Plausibility with APP1 violated.
- P0108 Mahindra Genio (BS III & BSIV)- Environment Pressure Sensor voltage above upperlimit .
- P1221 Mahindra Bolero (VLX)(m2Di CR) - Accelerator Pedal signal not plausible with brake.
- P110B Mahindra Genio (BS III & BSIV)- Signal error of AFS.
- P1250 Mahindra Bolero (VLX)(m2Di CR) - No Load.
- P0112 Mahindra Genio (BS III & BSIV)- Air temperature sensor voltage below lowerlimit.
- P1251 Mahindra Bolero (VLX)(m2Di CR) - Excess Temperature.
- P0113 Mahindra Genio (BS III & BSIV)- Air temperature sensor voltage above upperlimit.
- P0117 Mahindra Genio (BS III & BSIV)-Voltage below lowerlimit.
- P0107 Mahindra Maxximo- Environment Pressure Sensor voltage below lower limit.
- P0118 Mahindra Genio (BS III & BSIV)-Voltage above upperlimit
- P0108 Mahindra Maxximo- Environment Pressure Sensor voltage above upper limit
- P121A Mahindra Genio (BS III & BSIV)- Main relay does not open in time.
- P121B Mahindra Genio (BS III & BSIV)- Main relay sticky.
- P0123 Mahindra Genio (BS III & BSIV)- Signal Range Check(SRC) High.
- P1252 Mahindra Bolero (VLX)(m2Di CR) - Short Circuit to Battery.
- P126C Mahindra Genio (BS III & BSIV)- No load on cylinder 1 reported.
- P190C Mahindra Maxximo- Diagnostic fault check to report that WDA is not working correct
- P1253 Mahindra Bolero (VLX)(m2Di CR) - Short Circuit to Ground.
- P127C Mahindra Genio (BS III & BSIV)- No load on cylinder 2 reported.
- P128C Mahindra Genio (BS III & BSIV)- No load on cylinder 3 reported.
- P129C Mahindra Genio (BS III & BSIV)- No load on cylinder 4 reported.
- P160A Mahindra Genio (BS III & BSIV) - Short circuit to ground.
- P160B Mahindra Genio (BS III & BSIV) - Over temperature in the power stage of the ECU.
- P162B Mahindra Genio (BS III & BSIV)- EEPROM: error during last read operation.
- P162C Mahindra Genio (BS III & BSIV)- EEPROM: error during last write operation.
- P1531 Mahindra Bolero (VLX)(m2Di CR) - Short circuit to ground.
- P1530 Mahindra Bolero (VLX)(m2Di CR) - Short circuit to battery.
- P1532 Mahindra Bolero (VLX)(m2Di CR) - No load.
- P1533 Mahindra Bolero (VLX)(m2Di CR) - Excess temperature.
- P1608 Mahindra Bolero (VLX)(m2Di CR) - Short circuit to battery.
- P1609 Mahindra Bolero (VLX)(m2Di CR) - Short circuit to ground.
- P1621 Mahindra Bolero (VLX)(m2Di CR) - Below lower limit of energizing time- Injector # 4.
- P1623 Mahindra Bolero (VLX)(m2Di CR) - Below lower limit of energizing time- Injector # 1.
- P1625 Mahindra Bolero (VLX)(m2Di CR) - Below lower limit of energizing time- Injector # 2.
- P1631 Mahindra Bolero (VLX)(m2Di CR) - (Hardware) CJ940 upper limit: internal supply voltage upper.
