You have no items in your shopping cart.
Products
- P1716-00: TATA LPT 1109 TURBO- Diagnostic fault chek to report that WDA is not working correct
- P1717-00: TATA LPT 1109 TURBO – OS timeout in the shut off path test. Failure setting the alarm task period
- P042B-00: TATA 3.8SGI / 5.7SGI CNG BS-IV (ECU560) -DFC for Catalyst Temperature Sensor Circuit Range/Performance
- P1718-00: TATA LPT 1109 TURBO – Diagnostic fault check to report that the positive test failed
- P1719-00: TATA LPT 1109 TURBO – Dignostic fault check to report the timeout in the shut off path test
- P1720-00: TATA LPT 1109 TURBO – Diagnostic fault check to report the error in overvoltage monitoring
- P1726-00: TATA LPT 1109 TURBO- Diagnostic fault check to report “WDA active” due to errors in query- / response communication
- P1727-00: TATA LPT 1109 TURBO – Diagnostic fault check to report “ABE active” due to under voltage detection.
- P042C-00: TATA 3.8SGI / 5.7SGI CNG BS-IV (ECU560) - DFC for Catalyst Temperature Sensor Circuit Low
- P1728-00: TATA LPT 1109 TURBO – Diagnostic fault check to report “ ABE active” due to overvoltage detection
- P1729-00: TATA LPT 1109 TURBO- Diagnostic fault check to report “WDA/ABE active” due to unknown reason
- P1739-00: TATA LPT 1109 TURBO- Repored MSC-Erros of a R 2S2
- P042D-00: TATA 3.8SGI / 5.7SGI CNG BS-IV (ECU560) - DFC for Catalyst Temperature Sensor Circuit High
- P1731-00: TATA LPT 1109 TURBO – ECU reports error for power supplies to sensor group 1(EGR and App2)
- P1732-00: TATA LPT 1109 TURBO- ECU reports error for power supplies to sensor group2
- P1738-00:TATA LPT 1109 TURBO – ECU software reset error 1
- P071A-00: TATA 3.8SGI / 5.7SGI CNG BS-IV (ECU560) -DFC for In-Gear detect circuit error
- P1739-00: TATA LPT 1109 TURBO – ECU software reset error 2
- P1740-00: TATA LPT 1109 TURBO- ECU software reset error 3
- P1714-00:TATA LPT 1109 TURBO – ECU reported for SPI errors of TIe623
- P1742-00: TATA LPT 1109 TURBO – Fuel injecion cut off demanded by the ECU
- P1750-00: TATA LPT 1109 TURBO – Diagnostic fault check to report the error due to OverRun
- P1757-00: TATA LPT 1109 TURBO-Error in speed limitation set value in EEPROM
- P1801-00: TATA LPT 1109 TURBO- Total counter for rail pressure limiting valve open condition exceeed the limit
- P1802-00: TATA LPT 1109 TURBO – Rail pressure limitng valve forced open
- P1803-00:TATA LPT 1109 TURBO – Rail pressure limiting valve forced open by pressure shocks
- P1804-00: TATA LPT 1109 TURBO- Rail pressure limiting valve opened
- P1807-00: TATA LPT 1109 TURBO – Total time for rail pressure limiting valve open condition exceeded the limit
- P1816-00: TATA LPT 1109 TURBO- Coolant sensor dynami plausibility check failed
- P2135-00: TATA LPT 1109 TURBO- Acceleratore pedal plausibility error between primary and secondary potentiometer
- P2228-11: TATA LPT 1109 TURBO – Environment pressure sensor voltage value lower than the allowed value
- P0313-00: TATA 3.8 SGI/ 5.7SGI CNG BS-IV (ECU560) – DFC for Misfire Detected with Low fuel
- P0093-00: TATA 3.8SGI / 5.7SGI CNG BS-IV (ECU560) -DFC for Leak in gas rail
- P0336-00: TATA 3.8SGI/ 5.7SGI CNG BS-IV ( ECU560) – DFC for Flywheel tooth sensor fault
- P0341-00: TATA 3.8 SGI/ 5.7SGI CNG BS-IV (ECU560) – DFC for Engine phase sensor fault
- P0106-00: TATA 3.8SGI / 5.7SGI CNG BS-IV (ECU560) -DFC for MAP outside of normal operating range.
- P0420-00: TATA 3.8SGI/ 5.7SGI CNG BS- IV (ECU560) -DFC for Caatalyst System Efficiency Below Threshold
- P0501-00: TATA 3.8SGI / 5.7SGI CNG BS- IV (ECU560) – DFC for Faulty road speed sensor
- P0562-00: TATA 3.8 SGI/ 5.75SGI CNG BS-IV (ECU560) – DFC for System voltage low
- P0563- TATA 3.8SGI/ 5.7SGI CNG BS-IV (ECU560) – DFC for System voltage HIgh
- P0638-00: TATA 3.8SGI / 5.7SGI CNG BS-IV (ECU560) – DFC for throttle actuator not at correct position
- P0107-00: TATA 3.8SGI / 5.7SGI CNG BS-IV (ECU560) - DFC for MAP sensor output is less than normal sensor range
- P0642-00: TATA 3.8SGI/ 5.7SGI CNG BS- IV (ECU560) – DFC for Sensor A-Internal reference voltage too low
- P0643-00: TATA 3.8SGI/ 5.7SGI CNG BS-IV (ECU560) – DFC for Sensor A-Internal reference voltage too high
- P0650-00: TATA 3.8SGI / 5.75SGI CNG BS- IV (ECU560) – DFC for Malfunction indicator Lamp (MIL) Control Circuit
- P0108-00: TATA 3.8SGI / 5.7SGI CNG BS-IV (ECU560) -DFC for MAP sensor output exceeds normal sensor range
- P0652-00: TATA 3.8SGI / 5.7SGI CNG BS-IV (ECU560) – DFC for Sensor B-Internal reference voltage too low
- P0653-00: TATA 3.8SGI / 5.7SGI CNG BS-IV (ECU560) – DFC for Sensor B-Internal reference voltage too high
- P0109-00: TATA 3.8SGI / 5.7SGI CNG BS-IV (ECU560) -DFC for MAP Sensor Circuit Intermittent
- P0667-00: TATA 3.8SGI/ 5.7SGI CNG BS-IV ( ECU560) – DFC for ECU temperature is outside of safe operating range
