Launch Car Scanner

Here comes the dry goods for everyone, this time I will give you statistics on common faults and summary of Volkswagen models. I specifically checked the relevant data, Volkswagen ranked first in 2018’s full-year sales, and this is the third consecutive year in the global car sales rankings. Therefore, I believe the article will satisfy everyone’s thirst for dry goods.

Throttle valve, a controllable valve that controls the entry of air into the engine. The depth of the accelerator pedal can directly affect the opening of this valve. After entering the intake pipe, the gas will be mixed with gasoline to become a combustible mixture, which will burn to form work. It is connected to the air filter and the engine block, which is called the throat of a car engine.

Automotive sensors are very important components. If they are damaged, the corresponding components will not work properly. Then, the guest bacteria will sort out some of the failure behaviors of the eight conventional sensors this time. Then you can judge by these performances in the future. Which sensor is the problem?

Just like when a person’s nose is clogged, they don’t feel able to breathe smoothly, and the whole person is weak and debilitated. When the engine has too much carbon, it will also appear “slumped”. Many car owners have experienced this experience. After driving their cars for several years, their power performance is getting worse and worse. Too much carbon deposit is one of the important reasons.

When there is too much carbon deposit, we naturally have to send it to a professional repair shop to clean the carbon deposit. So how to judge if your car has too much carbon? After learning these four methods of judgment, I can also know that they are inseparable.

What should you watch out for when using and replacing brake fluid?

1) When the brake fluid is mixed with mineral oil, the brake fluid should be completely replaced. For example, when gasoline, diesel or engine oil is inadvertently mixed into the brake system using synthetic brake fluid, it is likely to reduce the braking effect due to the incompatibility of the oil.

2) Brake fluids of different types or different grades must not be mixed. For brake systems with special requirements, a specific grade of brake fluid should be added. Due to different brake fluid formulations of different types or brands, the mismatched or refilled brands may cause the brake fluid quality index to drop and fail to meet the braking requirements. Even those brands that are more miscible and indicate that they can be mixed or replaced may not be used as well, and it is best not to use them for a long time.

The gearbox is an important part of the car, keeping it in good working condition to avoid some problems in the car , and replacing the gearbox oil is an important part of the gearbox maintenance. The transmission oil not only provides lubrication and cleaning for the entire transmission system, but also achieves heat dissipation, which protects the transmission from normal operation and extends its service life. Therefore, be sure to change the oil of the transmission oil regularly.

Car scanner is basically a tool used to diagnose the fault codes generated in the car due to some malfunctioning. It can be malfunctioning in engine or electrical system or in the braking system or any of the systems available inside a car. This malfunctioning generates fault codes and sent it to the ECM (Engine Control Module) and that codes get saved in the ECM memory. The scanner search for this DTC (Diagnostic Trouble Code) in the ECM memory and display it to the operator.